It is possible to cut the profile according to your dimensions.

Application

• to create lines of light flush with the surface of walls and ceilings

Installation

• fixed in the groove with fixing glue
• profile wings are covered with plaster
• protective insert TECH-50 ensures that the groove of the profile remains wide enough to close the cover (its use is necessary during installation and finishing works)

Additional information

• designed for four LED strips up to 10 mm wide,but the best option would be 2 strips with a width of 8-12 mm
• the light line is available with the LIGER-50 lens and LED strips, with a minimum density of 120 LEDs / meter
• the diffuser is evenly illuminated by four LED strips reduces the appearance of shadows
• KOZUS-50 profile is equipped with ZM sockets (ZM connectors are used to connect profiles lengthwise, they are easily accessible even after mounting the profile in the ceiling)
• groove cut in plasterboard for placing the profile should be 51-56 mm wide
• when installed in double plasterboard, the profile does not interfere with the structure

 with a minimum density of 120 LEDs / meter

• the diffuser is evenly illuminated by four LED strips, reduces the appearance of shadows
• the KOZUS-50 profile is equipped with ZM sockets (ZM connectors are used for connecting connection of profiles along the length, they are easily accessible even after installing the profile in the ceiling)
• the groove cut in the plasterboard for placing the profile should be 51-56 mm wide
• when installing in double plasterboard , the profile does not interfere with the construction

with a minimum density of 120 LEDs / meter

• the diffuser is evenly illuminated by four LED strips, reduces the appearance of shadows
• the KOZUS-50 profile is equipped with ZM sockets (ZM connectors are used for connecting the profiles along the length, they are easily accessible even after installing the profile in the ceiling)
• the groove cut in the plasterboard for placing the profile should be 51-56 mm wide
• when installing in double plasterboard , the profile does not interfere with the construction

the profile does not interfere with the construction

the profile does not interfere with the construction

should be 51-56 mm wide

• when installed in double plasterboard, the profile does not interfere with the structure

should be 51-56 mm wide

• when installed in double plasterboard, the profile does not interfere with the structure